LiFePo4 48v/60ah Battery Pack w/ Evolution 58.4v 20 amp Fully Sealed (ON-BOARD) Charger (DS, Precedent, Ezgo, Yahama)

• Comes with On-Board Fully Sealed Charger

Evolution 58.4v 20 amp fully sealed Charger

Specification of 1200W Waterproof Series
LiFePO4 Battery Charger
1. General
Battery Charger 1200W-48 can work normally under 58.4Vdc/20Aand with reverse polarity
protection.
2. Electrical Specification
2.1 Main product specification
No. Item Technical specification Remark
1 Apply to Battery □Li-ion Lifepo4 □Lead acid
2 Max output voltage 58.4V± 0.2V
3 Output current 20A ± 2%
4 Max. output power 1168W
5 Input voltage 110Vac
1
2.2 Input characteristic
No. Item Technical specification Remark
1 Rated input voltage 110Vac
2 Input voltage range 100 ~ 130Vac
3 AC input voltage frequency 50～60 Hz
No. Item Technical specification Remark
1 CC(constant current) 20A
2 CV(constant voltage) 58.4Vdc↓
3 Transition Current 1A
4 Power efficiency ≥90% Vin=110Vac,rated load
2.3 Output characteristic or charge stages
2
2.4 Protection characteristics
No. Item Technical specification Remark
1
Over voltage
protection Yes
2
Software over
voltage protection
The charger software limits the maximum output voltage to a
level suitable for the connected battery system.
3
Thermal
protection
Aluminum shell the inside temperature＞65℃，
4
Current limiting
protection Yes At CC
mode
5
Short circuit
protection
Short circuit protection should be automatically recovery after
remove the condition.
6
Reverse polarity
protection
When output wires are reversely connected to the battery the
charger will not operate and will work normally when DC
wires are correctly connected.
2.5 Charging indicator
No. Item Status Remark
1 Charging (＜80%) Red
2 Charging (＞80%) Yellow
3 Fully charged (100%) Green
4 Charging Voltage Display NO
5 Charging Current Display NO
3.Environmental condition
No. Item Technical specification Remark
1 Operation temperature -20～+45℃
2 Humidity 5～95%
3 Storage temperature -40～+70℃
4 Altitude 0～3000m
5 Cooling
filled with glue inside and
fan outside
3
4. Safety & EMC
5. Environmental testing requirements
No. Item Standard (or test condition) Remar